G T Audio - Hi-Fi Accessories

Hi-Fi Accessories.

Ebony record clamp • PHY-HP cables

Ebony record clamp

Now available - this solid ebony record clamp, hand-turned by a master craftsman and waxed to retain the beauty of its natural wood finish. The sonic attributes of the clamp are increased focus, improved stereo imaging and a general tightening of the lower registers.

Weight: 270g
Diameter: 70mm
Total height: 55mm
Spindle hole will accommodate the longest of record spindles.

Price - £399

• Back to Top

Ebony record clamp

Click to view in use

PHY-HP Cables

These cables not only use high quality conductors but also use insulation made from natural materials like cotton. This gives the PHY-HP cables a very natural balance of sound which is particularly important when using sensitive loudspeakers like horn designs. The mains cables are made of a similar construction and are screened for maximum RF rejection. The unshielded interconnects work very well between line level sources and between pre-amp and power amp configurations. The shielded cable would be required where the sensitivity of the power amplifier was very high (ie with very low input signal levels around 100-200mV) or between the tonearm and the pre-amplifier.

Interconnect cables
Unshielded 1.2m with RCA plugs
Shielded 1.2m with RCA plugs
Balanced 1.2m with XLR connectors (made to order).

Unshielded 1.2m interconnect

Loudspeaker cables
3m stereo pair terminated with spade connectors or 4mm plugs
4m stereo pair terminated with spade connectors or 4mm plugs
5m stereo pair terminated with spade connectors or 4mm plugs
6m stereo pair terminated with spade connectors or 4mm plugs
7m stereo pair terminated with spade connectors or 4mm plugs
8m stereo pair terminated with spade connectors or 4mm plugs
9m stereo pair terminated with spade connectors or 4mm plugs
10m stereo pair terminated with spade connectors or 4mm plugs.

One lead with 4mm connectors